Model: SBG04 | Make: Hukseflux |
Category: Heat Flux Sensor
SBG04 measures heat flux in the range of (10 to 100) x 10³ W/m². Equipped with a black absorber, heat flux sensors of this type are designed for measurement in an environment in which heat flux is dominated by radiation. SBG04’s thermopile sensor generates an output voltage proportional to the incoming irradiance. The sensor is water-cooled. Water cooling is typically supplied by tap water connected to the stainless steel in and outlet tubes. These tubes stand at a 90° angle to the 0.5 inch diameter cylindrical sensor body axis, and parallel to the black sensor surface as required for testing with cone calorimeters.
SBG04 employs a novel sensor design, which combines the benefits of foil technology of the traditional Gardon gauges with those of the thermopile technology of traditional Schmidt-Boelter gauges.
cone calorimeter compatible
all specifications and dimensions standardised according to ISO 5660 and ASTM E1354
reduced diameter of 12.7 mm (0.5 inch)
reduced installation height
tubes at 90° angle to the axis of body
scratch resistant absorber coating (reduced absorber height)
safe storage with a practical protection cap.