PCE-WSAC 50W 24 Anemometer

Model: PCE-WSAC 50W 24 Make: PCE Instruments

Key Highlights

    * The anemometer PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. The anemometer PCE-WSAC 50W is equipped with alarm relay for a pre-alarm or main alarm. * Measurand : Wind Speed, Wind Gust. * Sensor Type : Anemometer * Signal Output: Analog output (4 … 20-mA) * Supplied With: User manual, Battery Monocell D 1.5V DC, Radio antenna, Self-leveling additional bracket, Factory test/ Calibration Certificates.

Category: Cup Anemometer

The PCE-WSAC 50W anemometer is primarily used to measure and monitor wind load on cranes or wind turbines. Furthermore, before activating a wind turbine, the wind situation may be observed and analyzed. The PCE-WSAC 50W anemometer has an alarm relay for a pre-alarm or main alarm.

Stormy gusts can be observed thanks to the anemometer’s high measurement range of up to 50 m/s. The anemometer’s radio range in an open area is up to 750 meters (2500 feet) in the unlicensed 2.4 GHz frequency band. The wind sensor can have a range of up to 60 m (200 ft.) when the wind alarm PCE-WSAC 50W display is installed in structures.

Due to the integrated 4 … 20-mA analog output of the wind alarm display, the measured data can also be transferred to other controllers for evaluation.

Application


* Stormy gusts monitoring * Wind potential studies * Site appraisals * Research purposes * Meteorological Applications

Feature


* Robust plastic housing * Units: km / h, mph, m / s * 4 … 20-mA analog output * 128 x 64 pixel LC display * Alarm relay * Measuring range up to 180 km / h * Durable stainless steel ball bearings * Ambient temperature -20 … 70°C / -4 … 158°F * Radio transmission

Related Products