Menu Close

MW36-WIND DIRECTION VANE PROBES

Make: Mierij Meteo    Model:  MW36
✅ Highly reliable universal wind sensors , Designed for industrial applications , Wide range of outputs Shock and vibration proof , All-weather resistant.
✅ Measurand : Wind Direction.
✅ Sensor Type : Wind Vane.
✅ Signal Output: RS-485, NMEA 0183, Digital(NPN/PNP), Frequency (NPN/PNP) and Analog Output (0 – 10 V @ 0 – 360 °, 4 – 20 mA @ 0 – 360 °)
✅ Supplied With: 5 meter Cable, Factory test/ Calibration Certificates.
Compare
Category:

MW 36 is Industrial wind sensors that come from Mierij Meteo. The MW36 are shock and vibration resistant and can also be used at very low ambient temperatures.They are ideally suited for application on top of wind turbines where shock and vibration can be a problem.

Other common applications include the solar energy market where wind loads might affect the solar tracking of photovoltaic panels and solar collectors. Other applications are safety systems on construction sites, building automation, sea and air transportation, bridges, agriculture and environmental monitoring.

Delta OHM – Mierij Meteo industrial wind sensors have been tested under extreme environmental conditions (from arctic to desert climates). The embedded heater will keep the sensors ice-free at temperatures down to at least –40 ºC. The bearings are protected from dust and dirt to ensure a long, maintenance-free, operating life. Both sensors have a micro-controller, enabling the user to select the desired output, from analogue, frequency or serial. This unique feature makes MW 36 compatible with a wide range of data acquisition systems.

Make

Mierij Meteo

Model

MW36

Weight (Mass)

1 kg

Dimension

200 x 300 x 50 mm

Outputs

Analogue: 0 – 10 V @ 0 – 360 °, 4 – 20 mA @ 0 – 360 °
Digital (NPN/PNP): 1-2 bits Gray code (parallel)
Frequency (NPN/PNP): 0 – 100 Hz @ 0 – 360 °
Serial: RS-485, NMEA 0183

Power Supply

10.8 to 30 VDC

Power Consumption

Sensor Consumption with 4-20 mA output: 35 mA @ 12 VDC / 30 mA @ 24 VDC
Sensor Consumption with other outputs: 15 mA @ 12 VDC / 10 mA @ 24 VDC
Heater Consumption: 50 W @ 24 VDC only

Operating Environment

40 °C to + 60 °C The heater ensures operation to -40 °C in icing conditions

Cable

5 meter shielded cable

Wind Direction

Operating Range: 0 – 360 °
Resolution: 8 bit / 1.4 ° (internally)
Starting Speed: < 0.8 m/s
Maximum Wind Load: 80 m/s
Inaccuracy: < 3 °

Reviews

There are no reviews yet.

Be the first to review “MW36-WIND DIRECTION VANE PROBES”

Your email address will not be published.