HD2003.1 Ultrasonic Anemometer

Model: HD2003 Make: Delta ohm

Key Highlights

    * Ultrasonic static anemometer for measuring wind speed and direction. U-V-W Cartesian components of speed, Wind gust, Sound speed, Sonic temperature. * Measurand : Wind speed, Wind direction, Compass, Wind gust, Sound speed, Sonic temperature. * Sensor Type: Ultrasonic. * Signal Output: Analog (0-20mA, 4-20mA, 0÷1V, 0÷5V, 0÷10V, 1÷5V), Digital (RS232 and RS422 full duplex, RS485 MODBUSRTU, RS485 Multidrop and AoXnd half duplex) * Supplied With: Cable, Factory test/ Calibration Certificates.

Category: Ultrasonic Anemometer

HD2003.1 are three-axis ultrasonic, static anemometer for measuring wind speed and direction, U-V-W Cartesian Components of speed, wind gusts, sound speed, and sonic temperature. Five different analog voltage or current outputs for different ranges. Communication software for two-way connections for network connection of different anemometers, interfaces available RS232, RS485, RS422.Different measuring units and average periods are available. Transducer heating as optional. 12.. 30 Vdc power supply, 120 MA consumption at 15Vdc. To be mounted on a mast diam. 33mm. Flying connector included.

When ordering, if the expansion of analog outputs is necessary by additional external sensors with 0 1V analog output. In order to line up their range of the 0 1V scales, you must specify in this case the number of sensors you intend to use (max. five), and their physical range.

Application


* Meteorology * Aviation and Navigation * Tunnels, Highways * Climatology * Sport and winter stations * Safety in yards * Construction/Crane safety * Industrial buildings

Feature


* Determination of the anemometric quantities represented in various units of measurement: wind speed and direction, U-V-W Cartesian components of speed, wind gusts, sound speed, sonic temperature. * Five analog voltage or current outputs with different measuring ranges. * Up to 12 additional analog current or voltage outputs, with a variety of measurement ranges. * 5 Serial communication interfaces: RS232, RS422, RS485 MODBUS-RTU, RS485 Multi-drop and AoXnd communication mode. * Configurable output rate from the digital output data chain. * Configurable average periods 1÷60sec and 1÷60min. for all output quantities. * Algorithmic raw date processing and validation, assuring ± 1% precision to anemometric quantities. * Digital high frequency data acquisition mode with 50 Hz data output or high frequency analog data acquisition within 5 Hz and 20 Hz. * Self-diagnosis with error checking and report. * Reliability and precision on whole measuring range, no additional calibration required. * Flexible, easy-to use demo software, configurable according to the user’s needs through Computer interface. * User interface for ‘Setup’ management and software upgrade through RS232 or RS485. * Automatic alignment to the magnetic North through built in compass. * No moving part, with reduced maintenance and service costs. * Rugged and reliable structure, suitable for continuous operation even in severe environmental conditions. * Low power consumption. * (On request) Heaters Option: built-in heating device of sonic transducers, to prevent ice and snow formation. Assures correct measurements even in the presence of sleet or snow. * (On request) RS422

Related Products