Model: HD32MT.1 | Make: Delta Ohm |
Category: Data Logger
A programmable datalogger can take and store data from a set of sensors attached to its inputs. 8 analog inputs, 8 digital inputs, 2 pulse inputs, potential free contacts, software-programmable alerting RS485, RS232.
The HD32MT.1 is a data logger that can capture and log the values detected by sensors attached to its inputs. Because the data logger is totally programmable by the user, it is extremely adaptable.
The values recorded by the instrument can be transferred to a PC by using the HD32MTLogger software. The data logger can be configured to memorize the instant value, the minimum value, the maximum value, the average value and the standard deviation of the measurements. For measurements that require the counting of pulses, the total counted pulses can be stored.
Different recording intervals can be programmed for the various inputs, by defining up to 8 storing tables. Each recording includes acquisition date and time
The data logger has a “flash” internal memory arranged in circular mode: when the memory is full the new data overwrite the older ones. The number of storable measurements depends on the number of sensors employed, on the type of measurement to be stored and on the fact that the sensors are acquired all at the same time or at different instants. For example, with 11 sensors captured at the same time, 80,000 records can be stored, each one composed of 11 instantaneous measurements.
Data can also be saved in a removable SD-type memory card with a capacity of 8 GB. The use of a memory card allows extending the memory capacity of the instrument, allowing not losing the data when the internal memory is full. The acquired data are transferred to the memory card every 15 minutes.
The provided HD32MTLogger application software enables simple and straight forward programming using graphic interfaces without the need to learn any programming language, reducing the time required to get the system up and running.