2024-04-18 20:10:09
HD2013.3-Rain Detectors | MeteoXperts Solutions
Menu Close

HD2013.3-Rain Detectors

Make: Delta Ohm                                      Model: HD2013.3
✅ Quick  and simple to  integrate in any outdoor installation or configuration thanks to the enhanced connection possibilities.
✅ Measurand : Rain, Snow, Hail .
✅ Sensor Type : Capacitive, with integrated heater.
✅ Signal Output : Modbus-RTU or 4-20mA or 0-10V or contact output.
✅ Supplied With : Heavy duty mounting bracket, universal for surface or pole mounting, standard cable lengths 5 or 10 meter, Factory test/ Calibration Certificates..
                   

HD2013.3-Rain Detectors:

HD2013.3 detects all types of precipitation. We supply this version in Modbus-RTU, 4-20 mA, 0-10 volt, or contact output, making it quick and simple to integrate into any outdoor installation or configuration.

An integrated heater keeps the detector dry, evaporates water and prevents false signals caused by fog or dew. The heater also activates at low temperatures, melting the snow and allowing detecting snow precipitations by using an ambient temperature sensor.
The instrument external circular dome acts as a windshield for the sensor, preventing false indications.
An auto-calibration algorithm compensates for variations in the response due to the dirt that can accumulate on the sensitive surface.

Rainfall/snowfall detector. IP68. RS485 output with MODBUS-RTU or proprietary protocol, 4…20 mA analog output (0…10 V on request when ordering), and voltage-free contact output. A mounting bracket and an 8-pole watertight female free connector are included. Optional bird spikes (to be requested when ordering) CP2013.2—the cable has to be ordered separately.

As a renewed and advanced version of the HD2013.2, we introduce the HD2013.3 precipitation detector. HD2013.3 detects all types of precipitations. Quick and simple to integrate into any outdoor installation or configuration thanks to the enhanced connection possibilities: we supply this version in Modbus-RTU or 4-20mA or 0-10V or contact output.

The detector has IP68 protection degree.
Supplied with fixing bracket for ∅ 30…50 mm mast.
Optional bird spikes (to be requested when ordering the detector) can be mounted.

Application and features of HD2013.3-Rain Detectors:

Application

Features

✅ Environmental Monitoring
✅ Research
✅ Agriculture
✅ Meteorology research
✅ Hydrology
✅ Capacitive element is shielded from the wind by the protecting dome construction: no false indications
✅ Capacitive element is heated to be able to detect any form of precipitation, including snow and hail
✅ Can be standard equipped with bird-spikes
✅ Supplied with heavy duty mounting bracket, universal for surface or pole mounting
✅ Standard cable lengths 5 or 10 meter
Make

Delta ohm

Model

HD2013.3

General Specification

:-

Weight

450 g approx

Dimension

Ø 70 x 70 mm

Precipitation Type

Rain – Snow – Hail

Outputs

RS485 not isolated, with MODBUS RTU or proprietary protocol
Analog 0/4…20 mA (RLmax = 500Ω ) or on request 0…10 V (RLmin = 10 kΩ)
Voltage-free normally open contact max. 200 mA @ 30 Vdc resistive load

Measurement Range

Precipitation detection : ON / OFF (precipitation in progress / no precipitation) Percentage of dry sensitive surface of the sensor
Temperature : -40…+60 °C

Resolution

Precipitation detection : Configurable 1 % (default) or 0.1 % of dry sensitive surface of the sensor
Temperature : 0.1 °C

Power Supply

12…30 Vdc

Power Consumption

With heating OFF: 18 mA @24 Vdc
With heating ON: 230 mA max @24 Vdc
The indicated consumption does not include the consumption due to the possible analog output

Operating Environment

-40…+60 °C / 0…100 %RH

Precipitation Intensity

Rain Detection With any precipitation intensity

Protection Level

IP 68

Reviews

There are no reviews yet.

Be the first to review “HD2013.3-Rain Detectors”

Your email address will not be published. Required fields are marked *