2024-04-25 10:21:06
HD2003.1 Ultrasonic Anemometer | MeteoXperts Solutions
Menu Close

HD2003.1 Ultrasonic Anemometer

Make: Delta ohm                                      Model: HD2003
✅ Ultrasonic static anemometer for measuring wind speed and direction. U-V-W Cartesian components of speed, Wind gust, Sound speed, Sonic temperature.
✅ Measurand : Wind speed, Wind direction, Compass, Wind gust, Sound speed, Sonic temperature..
✅ Sensor Type: Ultrasonic
✅ Signal Output: Analog (0-20mA, 4-20mA, 0÷1V, 0÷5V, 0÷10V, 1÷5V), Digital (RS232 and RS422 full duplex, RS485 MODBUSRTU, RS485 Multidrop and AoXnd half duplex)
✅ Supplied With: Cable, Factory test/ Calibration Certificates.
                

HD2003.1 Ultrasonic Anemometer:

HD2003.1 are three-axis ultrasonic, static anemometer for measuring wind speed and direction, U-V-W Cartesian Components of speed, wind gusts, sound speed, and sonic temperature. Five different analog voltage or current outputs for different ranges. Communication software for two-way connections for network connection of different anemometers, interfaces available RS232, RS485, RS422.Different measuring units and average periods are available. Transducer heating as optional. 12.. 30 Vdc power supply, 120 MA consumption at 15Vdc. To be mounted on a mast diam. 33mm. Flying connector included.

When ordering, if the expansion of analog outputs is necessary by additional external sensors with 0 1V analog output. In order to line up their range of the 0 1V scales, you must specify in this case the number of sensors you intend to use (max. five), and their physical range.

Application and features of HD2003.1 Ultrasonic Anemometer:

Application

Features

✅ Meteorology
✅ Aviation and Navigation
✅ Tunnels, Highways
✅ Climatology
✅ Sport and winter stations
✅ Safety in yards
✅ Construction/Crane safety
✅ Industrial buildings
✅ Determination of the anemometric quantities represented in various units of measurement: wind speed and direction, U-V-W Cartesian components of speed, wind gusts, sound speed, sonic temperature.
✅ Five analog voltage or current outputs with different measuring ranges.
✅ Up to 12 additional analog current or voltage outputs, with a variety of measurement ranges.
✅ 5 Serial communication interfaces: RS232, RS422, RS485 MODBUS-RTU, RS485 Multi-drop and AoXnd communication mode.
✅ Configurable output rate from the digital output data chain.
✅ Configurable average periods 1÷60sec and 1÷60min. for all output quantities.
✅ Algorithmic raw date processing and validation, assuring ± 1% precision to anemometric quantities.
✅ Digital high frequency data acquisition mode with 50 Hz data output or high frequency analog data acquisition within 5 Hz and 20 Hz.
✅ Self-diagnosis with error checking and report.
✅ Reliability and precision on whole measuring range, no additional calibration required.
✅ Flexible, easy-to use demo software, configurable according to the user’s needs through Computer interface.
✅ User interface for ‘Setup’ management and software upgrade through RS232 or RS485.
✅ Automatic alignment to the magnetic North through built in compass.
✅ No moving part, with reduced maintenance and service costs.
✅ Rugged and reliable structure, suitable for continuous operation even in severe environmental conditions.
✅ Low power consumption.
✅ (On request) Heaters Option: built-in heating device of sonic transducers, to prevent ice and snow formation. Assures correct measurements even in the presence of sleet or snow.
✅ (On request) RS422
Make

Delta ohm

Model

HD2003.1

General Specification

:-

Weight

1.5Kg

Outputs

Digital Outputs: Quantities: Anemometric and compass. (HD2003 Model) Pressure, Temperature, Relative, Humidity
Communications: RS232 and RS422 full duplex, RS485 MODBUSRTU, RS485 Multidrop and AoXnd half duplex
Baud rate: 9600 ÷ 115200 bit/sec
Output Rate: Normal mode (Slow): 1 ÷ 3600 sec, Digital High Frequency (Fast): fixed 50Hz
Analog Outputs: Quantities: 5 to be selected from output quantities (anemometric, compass, meteo).
Range: 0-20mA, 4-20mA, 0÷1V, 0÷5V, 0÷10V, 1÷5V
Resolution: 14 bits max

Power Supply

Range: 12 ÷ 30 Vdc
Power: < 2W – (Typically: 110mA @ 15Vdc), < 6W – Models with heaters and environment, temperature not lower than –10 °C

Wind Speed

Unit: m/s, cm/s, km/h, knots, mph
Range: 0 ÷ 70 m/s (252 km/h)
Resolution: 0.01 m/s
Accuracy: ± 1% of reading

Power Consumption

120mA

Wind Direction

Range: 0 ÷ 360° Elevation: ± 60°
Resolution: 0.1°
Accuracy: ± 1 °

Sound Speed

Range: 300 ÷ 380 m/s
Resolution: 0.01 m/s
Accuracy: ± 1% of reading

Sonic Temperature

Range: -40 +60°C
Resolution: 0.1 °C
Accuracy: ± 1 °C

Compass

Range: 0÷3600 /10°
Resolution: 0.1°
Accuracy: ± 1°

Reviews

There are no reviews yet.

Be the first to review “HD2003.1 Ultrasonic Anemometer”

Your email address will not be published. Required fields are marked *